Clean Fuel Regulations (SOR/2022-140)

1 The following information with respect to the registered creator, carbon-intensity contributor or foreign supplier:

• (a) their name, civic address, postal address, telephone number and, if any, email address;

• (b) the name, title, civic address, postal address, telephone number and, if any, email address of their authorized agent; and

• (c) the name, title, civic address, postal address, telephone number and, if any, email address of a contact person, unless the contact person is the authorized agent.

2 In the case of a fuel or material input with an approved carbon intensity determined in accordance with paragraph 75(1)(b) or section 76 or 77 of these Regulations, the following information:

• (a) the name, GPS coordinates to the fifth decimal place and, if any, civic address of the production facility where the low-carbon-intensity fuel or material input was produced;

• (b) the type of low-carbon-intensity fuel or material input for which the determination was made;

• (c) if the approved carbon intensity was determined in accordance with paragraph 75(1)(b) of these Regulations,

  • (i) the type of feedstock that was used to produce the fuel or material input,

  • (ii) if a feedstock was extracted, harvested or produced, the region where it was extracted , harvested or produced, as the case may be,

  • (iii) the carbon intensity of the fuel or material input that was approved under subsection 85(1) of these Regulations and any alphanumeric identifier that was assigned to that carbon intensity,

  • (iv) the type of thermal energy and the source of electricity used at the production facility,

  • (v) if the application for the approval of the carbon intensity indicated that the variable CI_p of the formula that is referred to in paragraph 75(1)(b) of these Regulations has a value of 13 g/MJ, the percentage of the electrical and thermal energy used at the production facility that is from non-fossil sources, electricity with a carbon intensity of less than 100 g/MJ, hydrogen from renewable sources, hydrogen from natural gas with carbon capture and storage or a mix of those sources and the estimated quantity of thermal energy and electricity from each source, and

  • (vi) if the application for the approval of the carbon intensity indicated that the variable CI_td of the formula that is referred to in paragraph 75(1)(b) of these Regulations has a value of 0 g/MJ, the distance between the site where the feedstock was extracted, harvested or produced and the production facility where the fuel or material input was produced and the distance between that facility and the final location where the fuel or material input is distributed to end users; and

• (d) if the approved carbon intensity was determined in accordance with section 76 or 77 of these Regulations,

  • (i) a copy of the pathway from the Fuel LCA Model, including all data that are input into the Fuel LCA Model and all results that are obtained from it using input data for the compliance period and the preceding compliance period,

  • (ii) the carbon intensity of the fuel or material input, rounded to the nearest hundredth of a gram of CO₂e per megajoule,

  • (iii) if an additional value referred to in subsection 80(2) of these Regulations has been added to the carbon intensity referred to in subparagraph (ii), the additional value and the sum of the additional value and the carbon intensity value, rounded to the nearest hundredth of a gram of CO₂e per megajoule,

  • (iv) if the pathway from the Fuel LCA Model that was used for the determination of the carbon intensity is a new pathway, any alphanumeric identifier assigned to the new pathway under subsection 81(4) of these Regulations,

  • (v) a description of the data sources and the methods used to collect and determine the data that are entered into a data workbook,

  • (vi) a copy of the data workbook, including any calculations performed on the data, that is consistent with the Specifications for Fuel LCA Model CI Calculations and used to determine the data that are inputted into the Fuel LCA Model,

  • (vii) any supporting documentation required by the Specifications for Fuel LCA Model CI Calculations, and

  • (viii) the information listed in any applicable emission-reduction quantification method established under subsection 31(1) or 32(1) of these Regulations.

3 In the case of a carbon intensity determined in accordance with section 78 of these Regulations, the following information:

• (a) the name, GPS coordinates to the fifth decimal place and, if any, civic address of each location where a fuelling station supplied the fuel;

• (b) the GPS coordinates to the fifth decimal place and, if any, civic address of each location, other than a fuelling station, where propane, renewable propane, co-processed low-carbon-intensity propane, natural gas, renewable natural gas or hydrogen is liquefied or compressed for use in the fuelling station;

• (c) the type of fossil fuel supplied, if any, to each fuelling station referred to in paragraph (a);

• (d) the type of low-carbon-intensity fuel supplied, if any, to vehicles at each fuelling station referred to in paragraph (a);

• (e) a copy of the pathway from the Fuel LCA Model, including all data that are inputted into the Fuel LCA Model and all results that are obtained from it, using input data for the compliance period and the preceding compliance period;

• (f) the carbon intensity of the fuel determined in accordance with the Fuel LCA Model, rounded to the nearest hundredth of a gram of CO₂e per megajoule;

• (g) if an additional value referred to in subsection 80(2) of these Regulations has been added to the carbon intensity referred to in paragraph (f), the additional value and the sum of the additional value and the carbon intensity value, rounded to the nearest hundredth of a gram of CO₂e per megajoule;

• (h) in the case of a new pathway, any alphanumeric identifier assigned to the new pathway under subsection 81(4) of these Regulations;

• (i) a description of the data sources and the methods used to collect and determine the data that are entered into a data workbook;

• (j) a copy of the data workbook, including any calculations performed on the data, that is consistent with the Specifications for Fuel LCA Model CI Calculations and used to determine the data that are inputted into the Fuel LCA Model;

• (k) any supporting documentation required by the Specifications for Fuel LCA Model CI Calculations; and

• (l) the information listed in any applicable emission-reduction quantification method established under subsection 31(1) or 32(1) of these Regulations.

4 In the case of a carbon intensity determined in accordance with section 79 of these Regulations, the following information:

• (a) the name, GPS coordinates to the fifth decimal place and, if any, civic address of each facility or location where there is one or more charging stations or fuelling stations to which any electricity was supplied;

• (b) the GPS coordinates to the fifth decimal place and, if any, civic address of each site where any electricity was produced, other than a facility or location referred to in paragraph (a);

• (c) a copy of the pathway from the Fuel LCA Model, including all data that are inputted into the Fuel LCA Model and all results that are obtained from it, using input data for the compliance period and the preceding compliance period;

• (d) the carbon intensity of the electricity determined in accordance with the Fuel LCA Model, rounded to the nearest hundredth of a gram of CO₂e per megajoule;

• (e) if an additional value referred to in subsection 80(2) of these Regulations has been added to the carbon intensity value referred to in paragraph (d), the additional value and the sum of the additional value and the carbon intensity value, rounded to the nearest hundredth of a gram of CO₂e per megajoule;

• (f) in the case of a new pathway, any alphanumeric identifier assigned to the new pathway under subsection 81(4) of these Regulations;

• (g) a description of the data sources and the methods used to collect and determine the data that are entered into a data workbook;

• (h) a copy of the data workbook, including any calculations performed on the data, that is consistent with the Specifications for Fuel LCA Model CI Calculations and used to determine the data that are inputted into the Fuel LCA Model;

• (i) any supporting documentation required by the Specifications for Fuel LCA Model CI Calculations; and

• (j) the information listed in any applicable emission-reduction quantification method established under subsection 31(1) or 32(1) of these Regulations.

5 If the determination of the carbon intensity includes a carbon intensity that was approved under subsection 85(1) of these Regulations and transferred from a carbon-intensity contributor, foreign supplier or registered creator, the following information:

• (a) the name, civic address, postal address, telephone number and, if any, email address, of the carbon-intensity contributor, foreign supplier or registered creator;

• (b) the type of low-carbon-intensity fuel, material input or energy source that they provided; and

• (c) the approved carbon intensity of the low-carbon-intensity fuel, material input or energy source referred to in paragraph (b) and the alphanumeric identifier assigned to it under section 85(2) of these Regulations.

6 If the actual carbon intensity specified in the report is different than the carbon intensity that was approved under subsection 85(1) of these Regulations, information that explains the difference.