Canadian Aviation Regulations

Version of section 1000.03 from 2019-01-01 to 2020-12-31:

1000.03 (1) CO₂ emissions must be determined using the following formula and expressed in tonnes:
$\underset{f}{Σ} M_{f} x {FCF}_{f}$
where
M_f
is the mass of fuel f used, expressed in tonnes and calculated according to one of the following methods:
- (a) a method described in any of 2.2 to 2.6 of Appendix 2 of CORSIA, except 2.6.2.2 and subject to subsection (2); or
- (b) a method described in 2.1.3 or 2.1.4 of Appendix 3 of CORSIA; and
FCF_f
is the fuel conversion factor of given fuel f, expressed in kg CO₂/kg fuel, equal to
- (a) 3.16 for Jet-A and Jet-A1 fuels; or
- (b) 3.10 for aviation gasoline (AvGas) or Jet-B fuel.
(2) For the purposes of 2.2.2 and 2.3.2 of Appendix 2 of CORSIA, if a flight is operated by a private operator or air operator on behalf of another private operator or air operator, the latter shall ensure that the fuel measurement values calculated according to the Block-off/Block-on method are provided to it and taken into account in its calculations.

Language selection