Canadian Aviation Regulations

573.04 (1) The person responsible for maintenance shall, within 30 days after their appointment under paragraph 573.03(1)(a), submit to the Minister a signed statement that they accept the responsibilities of their position.

(2) [Repealed, SOR/2019-295, s. 12]

(3) The person responsible for maintenance shall, where a finding resulting from a quality assurance program established under subsection 573.09(1) or a safety management system referred to in section 573.30 is reported to them,

• (a) determine what, if any, corrective actions are required and carry out those actions;

• (b) keep a record of any determination made under paragraph (a) and the reason for it;

• (c) if management functions have been assigned to another person under subsection (4) or (5), communicate any determination regarding a corrective action to that person; and

• (d) notify the accountable executive of any systemic deficiency and of the corrective action taken.

(4) The person responsible for maintenance may assign the management functions for the entire quality assurance program established under subsection 573.09(1) or for the safety management system referred to in 573.30 to another person if

• (a) that person meets the requirements set out in paragraph 573.03(1)(c) and subsection 573.03(6); and

• (b) the assignment and its scope are described in the AMO’s MPM.

(5) The person responsible for maintenance may assign the management functions for specific maintenance activities to another person if the assignment and its scope are described in the AMO’s MPM.

(6) The responsibility of the person responsible for maintenance is not affected by the assignment to another person of management functions under subsection (4) or (5).