Heavy-duty Vehicle and Engine Greenhouse Gas Emission Regulations

Marginal note:Engine installation

• 51 (1) A company that manufactures or imports a heavy-duty engine must ensure that every engine that is installed in a vehicle in Canada is accompanied by documentation respecting the engine and emission controls or by the address of the place or the website where that documentation may be obtained.

• Marginal note:Contents

  (2) The documentation must contain the following information:

  • (a) detailed installation procedures for the exhaust system, emission control system, aftertreatment devices and their components;

  • (b) all necessary steps for installing any diagnostic system required under part 86 of Title 40, chapter I, subchapter C, of the CFR;

  • (c) the limits on the types of use for the engine to ensure that the emission standards set out in these Regulations are complied with; and

  • (d) for each engine configuration, the fuel map results and other information described in section 510 of Title 40, chapter I, subchapter U, part 1036, subpart F, of the CFR.

• Marginal note:Language

  (3) The documentation must be provided in English, French or both official languages, as requested by the installer. However, in the case of a fuel map input file used for running the GEM computer simulation model, if the installer requests that the fuel map input file be provided in French, it must be provided in both official languages.