Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Storage Tank Systems for Petroleum Products and Allied Petroleum Products Regulations

Version of section 14 from 2012-05-04 to 2017-06-01:

  •  (1) The owner or operator of a storage tank system that installs the system or any component of the system on or after the day on which these Regulations come into force must ensure that the system or the component conforms to the applicable requirements set out in the following provisions of the CCME Code of Practice:

    • (a) Part 3, subject to the following:

      • (i) excluding Section 3.2, Clause 3.3.1(1)(c), Article 3.3.2, Clause 3.4.1(1)(c), Article 3.4.3, Clauses 3.5.1(1)(a) and 3.6.1(1)(l), Section 3.7, Clause 3.9.2(2)(a), Articles 3.9.4 and 3.10.1, and

      • (ii) in Subclause 3.9.2(1)(a)(ii), the reference to “Aboveground Secondary Containment Tanks” must be read as a reference to “Secondary Containments for Aboveground Flammable and Combustible Liquid Storage Tanks”;

    • (b) Part 4, except Articles 4.2.1 to 4.2.3, Clauses 4.2.4(1)(e) and 4.2.4(2)(h), Articles 4.2.5 and 4.2.6, Sentences 4.2.8(1), 4.2.8(2), 4.2.9(1), 4.3.1(1), 4.3.6(1), 4.3.6(2), 4.3.7(1), 4.3.7(2) and 4.3.8(1), Section 4.4 and Clauses 4.5.1(1)(a), (c) and (d) and Sentences 4.5.2(1) to 4.5.2(4) and 4.5.3(2);

    • (c) Part 5, subject to the following:

      • (i) excluding Sentence 5.2.1(1), Articles 5.2.4 to 5.2.6, Clause 5.4.2(1)(b), Sentence 5.4.3(1) and Section 5.5, and

      • (ii) in Clauses 5.4.4(1)(a) to (c), the references to standards must be read as references to ULC/ORD-C971, Nonmetallic Underground Piping for Flammable and Combustible Liquids; and

    • (d) Section 8.6 and Article 8.7.2.

  • (2) The owner or operator of a storage tank system that has aboveground tanks that installs those tanks on or after the day on which these Regulations come into force must ensure that those tanks are equipped with a spill containment device that bears a certification mark certifying conformity with ULC-ORD-C142.19, Spill Containment Devices for Aboveground Flammable and Combustible Liquid Storage Tanks unless

    • (a) the tank is filled remotely and its remote fill is equipped with a spill containment device that bears a certification mark certifying conformity with ULC-ORD-C142.19, Spill Containment Devices for Aboveground Flammable and Combustible Liquid Storage Tanks; or

    • (b) the tank bears a certification mark certifying conformity with one of the following standards:

      • (i) ULC-S652, Standard for Tank Assemblies for Collection of Used Oil,

      • (ii) CAN/ULC-S653, Standard for Aboveground Steel Contained Tank Assemblies for Flammable and Combustible Liquids,

      • (iii) ULC/ORD-C142.5, Concrete Encased Steel Aboveground Tank Assemblies for Flammable and Combustible Liquids,

      • (iv) ULC/ORD-C142.18, Rectangular Steel Aboveground Tanks for Flammable and Combustible Liquids,

      • (v) ULC/ORD-C142.21, Aboveground Used Oil Systems, or

      • (vi) ULC/ORD-C142.22, Contained Vertical Steel Aboveground Tank Assemblies for Flammable and Combustible Liquids.

  • (3) The owner or operator of a storage tank system that has underground tanks that installs those tanks on or after the day on which these Regulations come into force must ensure that those tanks bear a certification mark certifying conformity with one of the following standards:

    • (a) for underground steel tanks

      • (i) if used for storing used oil, ULC-S652, Standard for Tank Assemblies for Collection of Used Oil, and

      • (ii) if used for storing other petroleum products or allied petroleum products

        • (A) Part B of ULC-S603, Standard for Steel Underground Tanks for Flammable and Combustible Liquids, or

        • (B) CAN/ULC-S603.1, External Corrosion Protection Systems for Steel Underground Tanks for Flammable and Combustible Liquids;

    • (b) for underground reinforced plastic tanks

      • (i) if used for storing used oil, ULC-S652, Standard for Tank Assemblies for Collection of Used Oil, and

      • (ii) if used for storing other petroleum products or allied petroleum products, ULC-S615, Standard for Reinforced Plastic Underground Tanks for Flammable and Combustible Liquids; and

    • (c) for underground tanks that are double containment linings, ULC/ORD-C58.4, Double Containment Fibre Reinforced Plastic Linings for Flammable and Combustible Liquid Storage Tanks.

  • (4) The owner or operator of a storage tank system that has steel underground tanks that installs those tanks on or after the day on which these Regulations come into force must ensure that those tanks are protected from corrosion as follows:

    • (a) those tanks must bear a certification mark certifying conformity with CAN/ULC-S603.1, External Corrosion Protection Systems for Steel Underground Tanks for Flammable and Combustible Liquids; or

    • (b) those tanks must have a cathodic protection system designed by a corrosion expert.

  • (5) The owner or operator of a storage tank system that installs piping on or after the day on which these Regulations come into force must ensure that

    • (a) the piping does not have buried or concealed mechanical joints; and

    • (b) any piping other than copper piping bears a certification mark certifying conformity with

      • (i) one of the standards referred to in Clauses 5.2.1(1)(a) to (c) or (g) of the CCME Code of Practice, or

      • (ii) ULC/ORD-C971, Nonmetallic Underground Piping for Flammable and Combustible Liquids.

  • (6) Any reference to a standard in this section is a reference to the version of that standard that exists at the time the storage tank system’s component is erected, fabricated or manufactured, as applicable.

  • (7) The owner or operator of a storage tank system must comply with the applicable requirements before any petroleum products or allied petroleum products are first transferred into that system.

  • SOR/2012-99, s. 22

Date modified: