Off-Road Small Spark-Ignition Engine Emission Regulations

17.2 (1) The national emissions mark is the mark set out in the schedule.

(2) The national emissions mark shall be at least 7 mm in height and 10 mm in width.

(3) The national emissions mark and any label required by these Regulations, except for a label referred to in paragraph 16(d), subsection 17.4(6) or section 17.5, shall be located

• (a) on or immediately next to the label referred to in paragraph 16(d); or

• (b) if there is no label as referred to in paragraph 16(d), in a visible or readily accessible location.

(4) Except for the label referred to in paragraph 16(d), any label required by these Regulations, including the label on which the national emissions mark appears, shall

• (a) be permanently applied so that any attempt to alter or remove it would damage it;

• (b) be resistant to or protected against any weather condition; and

• (c) bear inscriptions that are legible and indelible and that are indented, embossed or in a colour that contrasts with the background of the label.

(5) A company that has been authorized to apply the national emissions mark shall display the authorization number assigned by the Minister in figures that are at least 2 mm in height, immediately below or to the right of the national emissions mark.