are neither normal components of the fuel nor additives designed to improve the characteristics or the performance of the fuel; or
(b)
are normal components of the fuel or additives designed to improve the characteristics or performance of the fuel, but are present in quantities or concentrations greater than those generally accepted by industry standards.
14
Dibenzo-para-dioxin that has the molecular formula C12H8O2
15
Dibenzofuran that has the molecular formula C12H8O
16
Polychlorinated dibenzo-para-dioxins that have the molecular formula C12H(8-n)ClnO2 in which “n” is greater than 2
17
Polychlorinated dibenzofurans that have the molecular formula C12H(8-n)ClnO in which “n” is greater than 2
trans 1-chloro-3,3,3-trifluoroprop-1-ene [HCFO-1233zd(E)]; and
(z.34)
2-amino-2-methyl-1-propanol.
66
Hexachlorobutadiene, which has the molecular formula C4Cl6
67
Particulate matter containing metals that is released in emissions from copper smelters or refineries, or from both
68
Particulate matter containing metals that is released in emissions from zinc plants
69
Dichlorodiphenyltrichloroethane (DDT), which has the molecular formula C14H9Cl5
70
2-butoxyethanol, which has the molecular formula C6H14O2
71
2-methoxyethanol, which has the molecular formula C3H8O2
72
Tetrachlorobenzenes, which have the molecular formula C6H 2Cl4
73
Pentachlorobenzene, which has the molecular formula C 6HCl5
74
Carbon dioxide, which has the molecular formula CO2
75
Methane, which has the molecular formula CH4
76
Nitrous oxide, which has the molecular formula N2O
77
Hydrofluorocarbons that have the molecular formula CnHxF(2n+2–x) in which 0<n<6
78
The following perfluorocarbons:
(a)
those that have the molecular formula CnF2n+2 in which 0<n<7; and
(b)
octafluorocyclobutane, which has the molecular formula C4F8.
79
Sulphur hexafluoride, which has the molecular formula SF6
80
Methanone, bis[4-(dimethylamino)phenyl]-, which has the molecular formula C17H20N2O
81
2-Butanone, oxime, which has the molecular formula C4H9NO
82
n-Butyl glycidyl ether, which has the molecular formula C7H14O2
83
Polybrominated diphenyl ethers that have the molecular formula C12H(10–n)BrnO in which 4≤n≤10
84
Perfluorooctane sulfonate and its salts
85
Compounds that contain one of the following groups: C8F17SO2, C8F17SO3 or C8F17SO2N
86
Methyloxirane, which has the molecular formula C3H6O
87
Ethyloxirane, which has the molecular formula C4H8O
88
Naphthalene, which has the molecular formula C10H8
89
Toluene diisocyanates, which have the molecular formula C9H6N2O2
90
1,2-Benzenediol, which has the molecular formula C6H6O2
91
1,4-Benzenediol, which has the molecular formula C6H6O2
92
Hexane, 1,6-diisocyanato-, homopolymer, reaction products with alpha-fluoro-omega-2-hydroxyethyl-poly(difluoromethylene), C16-20-branched alcohols and 1-octadecanol
93
2-propenoic acid, 2-methyl-, hexadecyl ester, polymers with 2-hydroxyethyl methacrylate, gamma-omega-perfluoro-C10-16-alkyl acrylate and stearyl methacrylate
94
2-propenoic acid, 2-methyl-, 2-methylpropyl ester, polymer with butyl 2-propenoate and 2,5-furandione, gamma-omega-perfluoro-C8-14-alkyl esters, tert-Bu benzenecarboperoxoate initiated
95
2-propen-1-ol reaction products with pentafluoroiodoethane tetrafluoroethylene telomer, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine
96
Phenol, 4,4′ -(1-methylethylidene)bis-, which has the molecular formula C15H16O2
97
Thiourea, which has the molecular formula CH4N2S
98
1,3-Butadiene, 2-methyl-, which has the molecular formula C5H8
99
Oxirane, (chloromethyl)-, which has the molecular formula C3H5ClO
100
Colour Index Pigment Yellow 34
101
Colour Index Pigment Red 104
102
Cyclotetrasiloxane, octamethyl-, which has the molecular formula C8H24O4Si4
103
Phenol, 2,4,6-tris(1,1-dimethylethyl)-, which has the molecular formula C18H30O
104
Ethanol, 2-methoxy-, acetate, which has the molecular formula C5H10O3
105
1-Propanol, 2-methoxy-, which has the molecular formula C4H10O2
106
2-Naphthalenol, 1-[(4-methyl-2-nitrophenyl)azo]-, which has the molecular formula C17H13N3O3
107
Ethanol, 2-(2-methoxyethoxy)-, which has the molecular formula C5H12O3
108
Sulfuric acid, diethyl ester, which has the molecular formula C4H10O4S
109
Sulfuric acid, dimethyl ester, which has the molecular formula C2H6O4S
110
[Repealed, SOR/2020-218, s. 1]
111
2-Propenamide, which has the molecular formula C3H5NO
112
Ethanol, 2-chloro-, phosphate (3:1), which has the molecular formula C6H12Cl3O4P
113
Tributyltins, which contain the grouping (C4H9)3Sn
114
Tetrabutyltins, which have the molecular formula (C4H9)4Sn
115
Benzene, (chloromethyl)-, which has the molecular formula C7H7Cl
116
Propane, 2-nitro-, which has the molecular formula C3H7NO2
117
Benzene, 1-methyl-2-nitro-, which has the molecular formula C7H7NO2
118
Phenol, 2,6-bis(1,1-dimethylethyl)-4-(1-methylpropyl)-, which has the molecular formula C18H30O
119
Methylium, [4-(dimethylamino)phenyl]bis[4-(ethylamino)3-methylphenyl]-, acetate, which has the molecular formula C27H34N3.C2H3O2
120
Chlorinated alkanes that have the molecular formula CnHxCl(2n+2–x) in which 10 ≤ n ≤ 20
121
Benzene, 1,2-dimethoxy-4-(2-propenyl)-, which has the molecular formula C11H14O2
122
Vanadium pentoxide, which has the molecular formula V2O5
123
Oxirane, 2,2′,2′′,2′′′-[1,2-ethanediylidenetetrakis(4,1-phenyleneoxymethylene)]tetrakis-, which has the molecular formula C38H38O8
124
Bromic acid, potassium salt, which has the molecular formula KBrO3
125
Polychlorinated naphthalenes, which have the molecular formula C10H8–nCln in which “n” is greater than 1
126
Hydrazine, which has the molecular formula N2H4
127
Hexabromocyclododecane, which has the molecular formula C12H18Br6
128
Quinoline, which has the molecular formula C9H7N
129
Perfluorooctanoic acid, which has the molecular formula C7F15CO2H, and its salts
130
Compounds that consist of a perfluorinated alkyl group that has the molecular formula CnF2n+1 in which n = 7 or 8 and that is directly bonded to any chemical moiety other than a fluorine, chlorine or bromine atom
131
Perfluorocarboxylic acids that have the molecular formula CnF2n+1CO2H in which 8 ≤ n ≤ 20 and their salts
132
Compounds that consist of a perfluorinated alkyl group that has the molecular formula CnF2n+1 in which 8 ≤ n ≤ 20 and that is directly bonded to any chemical moiety other than a fluorine, chlorine or bromine atom
133
Plastic microbeads that are ≤ 5 mm in size
134
The following petroleum and refinery gases:
(a)
tail gas (petroleum), catalytic polymerized naphtha fractionation stabilizer (a complex combination of hydrocarbons — obtained from the fractionation stabilization products that result from the polymerization of naphtha — consisting predominantly of hydrocarbons having carbon numbers in the range of C1 through C4);
(b)
fuel gases (a combination of light gases consisting predominantly of hydrogen or low molecular weight hydrocarbons or both);
(c)
hydrocarbons, C2-C4, C3-rich (a complex combination of hydrocarbons — obtained from a treating process to remove sulphur and other acidic compounds — consisting of hydrocarbons having carbon numbers in the range of C2 through C4, predominantly propane and propene);
(d)
gases (petroleum), butane splitter overhead (a complex combination of hydrocarbons — obtained from the distillation of the butane stream — consisting of aliphatic hydrocarbons having carbon numbers predominantly in the range of C3 through C4);
(e)
gases (petroleum), catalytic cracked gas oil depropanizer bottom, C4-rich acid-free (a complex combination of hydrocarbons — obtained from the fractionation of catalytic cracked gas oil hydrocarbon stream and treated to remove hydrogen sulfide and other acidic components — consisting of hydrocarbons having carbon numbers in the range of C3 through C5, predominantly C4);
(f)
gases (petroleum), catalytic cracked naphtha debutanizer bottom, C3-C5-rich (a complex combination of hydrocarbons — obtained from the stabilization of catalytic cracked naphtha — consisting of aliphatic hydrocarbons having carbon numbers predominantly in the range of C3 through C5);
(g)
gases (petroleum), catalytic cracked naphtha depropanizer overhead, C3-rich acid-free (a complex combination of hydrocarbons — obtained from the fractionation of catalytic cracked hydrocarbons and treated to remove acidic impurities — consisting of hydrocarbons having carbon numbers in the range of C2 through C4, predominantly C3);
(h)
gases (petroleum), catalytic cracker, C1-C5-rich (a complex combination of hydrocarbons — obtained from the distillation of products that result from a catalytic cracking process — consisting of aliphatic hydrocarbons having carbon numbers in the range of C1 through C6, predominantly C1 through C5);
(i)
gases (petroleum), catalytic polymerized naphtha stabilizer overhead, C2-C4-rich (a complex combination of hydrocarbons — obtained from the fractionation stabilization of catalytic polymerized naphtha — consisting of aliphatic hydrocarbons having carbon numbers in the range of C2 through C6, predominantly C2 through C4);
(j)
gases (petroleum), catalytic reformed naphtha stripper overhead (a complex combination of hydrocarbons — obtained from the stabilization of catalytic reformed naphtha — consisting of hydrogen and saturated aliphatic hydrocarbons having carbon numbers predominantly in the range of C1 through C4);
(k)
gases (petroleum), deethanizer overhead (a complex combination of hydrocarbons — obtained from the distillation of the gas and gasoline fractions that result from a catalytic cracking process — consisting predominantly of ethane and ethene);
(l)
gases (petroleum), deisobutanizer tower overhead (a complex combination of hydrocarbons — obtained from the atmospheric distillation of a butane-butene stream — consisting of aliphatic hydrocarbons having carbon numbers predominantly in the range of C3 through C4);
(m)
gases (petroleum), gas concentration reabsorber distillation (a complex combination of hydrocarbons — obtained from the distillation of products from combined gas streams in a gas concentration reabsorber — consisting predominantly of hydrogen, carbon monoxide, carbon dioxide, nitrogen, hydrogen sulfide and hydrocarbons having carbon numbers in the range of C1 through C3);
(n)
gases (petroleum), hydrogen-rich (a complex combination — separated as a gas from hydrocarbon gases by chilling — consisting predominantly of hydrogen with small amounts of carbon monoxide, nitrogen, methane and C2 hydrocarbons);
(o)
gases (petroleum), recycle, hydrogen-rich (a complex combination — obtained from recycled reactor gases — consisting predominantly of hydrogen with small amounts of carbon monoxide, carbon dioxide, nitrogen, hydrogen sulfide and saturated aliphatic hydrocarbons having carbon numbers in the range of C1 through C5);
(p)
gases (petroleum), reformer make-up, hydrogen-rich (a complex combination — obtained from the reformers — consisting predominantly of hydrogen with small amounts of carbon monoxide and aliphatic hydrocarbons having carbon numbers predominantly in the range of C1 through C5);
(q)
gases (petroleum), thermal cracking distillation (a complex combination — obtained from the distillation of products that result from a thermal cracking process — consisting of hydrogen, hydrogen sulfide, carbon monoxide, carbon dioxide and hydrocarbons having carbon numbers predominantly in the range of C1 through C6);
(r)
tail gas (petroleum), catalytic cracker refractionation absorber (a complex combination of hydrocarbons — obtained from the refractionation of products that result from a catalytic cracking process — consisting of hydrogen and hydrocarbons having carbon numbers predominantly in the range of C1 through C3);
(s)
tail gas (petroleum), cracked distillate hydrotreater separator (a complex combination of hydrocarbons — obtained by treating cracked distillates with hydrogen in the presence of a catalyst — consisting of hydrogen and saturated aliphatic hydrocarbons having carbon numbers predominantly in the range of C1 through C5);
(t)
tail gas (petroleum), saturate gas plant mixed stream, C4-rich (a complex combination of hydrocarbons — obtained from the fractionation stabilization of straight-run naphtha, distillation tail gas and catalytic reformed naphtha stabilizer tail gas — consisting of hydrocarbons having carbon numbers in the range of C3 through C6, predominantly butane and isobutane);
(u)
tail gas (petroleum), vacuum residue thermal cracker (a complex combination of hydrocarbons — obtained from the thermal cracking of vacuum residues — consisting of hydrocarbons having carbon numbers predominantly in the range of C1 through C5);
(v)
hydrocarbons, C3-C4-rich, petroleum distillates (a complex combination of hydrocarbons — obtained from the distillation and condensation of crude oil — consisting of hydrocarbons having carbon numbers in the range of C3 through C5, predominantly C3 and C4);
(w)
gases (petroleum), hydrocracking depropanizer off, hydrocarbon-rich (a complex combination of hydrocarbons — obtained from the distillation of products that result from a hydrocracking process — consisting predominantly of hydrocarbons having carbon numbers predominantly in the range of C1 through C4);
(x)
gases (petroleum), light straight-run naphtha stabilizer off (a complex combination of hydrocarbons — obtained from the stabilization of light straight-run naphtha — consisting of saturated aliphatic hydrocarbons having carbon numbers predominantly in the range of C2 through C6);
(y)
gases (petroleum), reformer effluent high-pressure flash drum off (a complex combination — obtained from the high-pressure flashing of the effluent from the reforming reactor — consisting predominantly of hydrogen with small amounts of methane, ethane and propane);
(z)
hydrocarbons, C1-C4 (a complex combination of hydrocarbons — obtained from thermal cracking and absorber operations and from the distillation of crude oil — consisting of hydrocarbons having carbon numbers predominantly in the range of C1 through C4 and boiling in the range of approximately -164°C to -0.5°C);
(z.1)
hydrocarbons, C1-C4, sweetened (a complex combination of hydrocarbons — obtained by subjecting hydrocarbon gases to a sweetening process to convert mercaptans or to remove acidic impurities — consisting of hydrocarbons having carbon numbers predominantly in the range of C1 through C4 and boiling in the range of approximately -164°C to -0.5°C);
(z.2)
hydrocarbons, C1-C3 (a complex combination of hydrocarbons having carbon numbers predominantly in the range of C1 through C3 and boiling in the range of approximately -164°C to -42°C);
(z.3)
gases (petroleum), C1-C5, wet (a complex combination of hydrocarbons — obtained from the distillation of crude oil or the cracking of tower gas oil or both — consisting of hydrocarbons having carbon numbers predominantly in the range of C1 through C5);
(z.4)
gases (petroleum), secondary absorber off, fluidized catalytic cracker overhead fractionater (a complex combination — obtained from the fractionation of the overhead products that result from a catalytic cracking process in the fluidized catalytic cracker — consisting of hydrogen, nitrogen and hydrocarbons having carbon numbers predominantly in the range of C1 through C3);
(z.5)
gases (petroleum), alkylation feed (a complex combination of hydrocarbons — obtained from the catalytic cracking of gas oil — consisting of hydrocarbons having carbon numbers predominantly in the range of C3 through C4);
(z.6)
petroleum products, refinery gases (a complex combination consisting predominantly of hydrogen with small amounts of methane, ethane and propane);
(z.7)
gases (petroleum), refinery (a complex combination — obtained from various petroleum refining operations — consisting of hydrogen and hydrocarbons having carbon numbers predominantly in the range of C1 through C3);
(z.8)
gases (petroleum), hydrotreated sour kerosine depentanizer stabilizer off (a complex combination — obtained from the depentanizer stabilization of hydrotreated kerosine — consisting predominantly of hydrogen, methane, ethane and propane with small amounts of nitrogen, hydrogen sulfide, carbon monoxide and hydrocarbons having carbon numbers predominantly in the range of C4 through C5);
(z.9)
gases (petroleum), crude oil fractionation off (a complex combination of hydrocarbons — obtained from the fractionation of crude oil — consisting of saturated aliphatic hydrocarbons having carbon numbers predominantly in the range of C1 through C5);
(z.10)
gases (petroleum), fluidized catalytic cracker fractionation off (a complex combination — obtained from the fractionation of the overhead products that result from a fluidized catalytic cracking process — consisting of hydrogen, hydrogen sulfide, nitrogen and hydrocarbons having carbon numbers predominantly in the range of C1 through C5);
(z.11)
gases (petroleum), heavy distillate hydrotreater desulfurization stripper off (a complex combination — stripped from the liquid product that results from a heavy distillate hydrotreater desulfurization process — consisting of hydrogen, hydrogen sulfide and saturated aliphatic hydrocarbons having carbon numbers predominantly in the range of C1 through C5);
(z.12)
gases (petroleum), preflash tower off, crude distillation (a complex combination — produced from the first tower used in the distillation of crude oil — consisting of nitrogen and saturated aliphatic hydrocarbons having carbon numbers predominantly in the range of C1 through C5);
(z.13)
gases (petroleum), straight-run stabilizer off (a complex combination of hydrocarbons — obtained from the fractionation of the liquid produced from the first tower used in the distillation of crude oil — consisting of saturated aliphatic hydrocarbons having carbon numbers predominantly in the range of C1 through C4);
(z.14)
tail gas (petroleum), catalytic hydrodesulfurized naphtha separator (a complex combination of hydrocarbons — obtained from the catalytic hydrodesulfurization of naphtha — consisting of hydrogen, methane, ethane and propane);
(z.15)
gases (petroleum), C3-C4 (a complex combination of hydrocarbons — obtained from the distillation of products that result from the cracking of crude oil — consisting of hydrocarbons having carbon numbers in the range of C3 through C4, predominantly propane and propene, and boiling in the range of approximately -51°C to -1°C);
(z.16)
gases (petroleum), C3-C4, isobutane-rich (a complex combination of hydrocarbons — obtained from the distillation of saturated and unsaturated hydrocarbons having carbon numbers predominantly in the range of C3 through C6, predominantly butane and isobutane — consisting of saturated and unsaturated hydrocarbons having carbon numbers in the range of C3 through C4, predominantly isobutane);
(z.17)
gases (petroleum), C4-rich (a complex combination of hydrocarbons — obtained from the distillation of products that result from a catalytic fractionation process — consisting of aliphatic hydrocarbons having carbon numbers in the range of C3 through C5, predominantly C4); and
(z.18)
hydrocarbons, C1-C4, debutanizer fraction (a complex combination of hydrocarbons — obtained from a debutanizing process — having carbon numbers in the range of C1 through C4).
(z.19)
petroleum gases, liquefied (a complex combination of hydrocarbons — obtained from the distillation of crude oil — consisting of hydrocarbons having carbon numbers predominantly in the range of C3 through C7 and boiling in the range of approximately -40°C to 80°C); and
(z.20)
petroleum gases, liquefied, sweetened (a complex combination of hydrocarbons — obtained by subjecting liquefied petroleum gases to a sweetening process to convert mercaptans or to remove acidic impurities — consisting of hydrocarbons having carbon numbers predominantly in the range of C3 through C7 and boiling in the range of approximately -40°C to 80°C).
135
Hexanedioic acid, bis(2-ethylhexyl) ester, which has the molecular formula C22H42O4
136
Reaction products of 2-propanone with diphenylamine
137
2-Naphthalenol, 1-[[4-(phenylazo)phenyl]azo]-, which has the molecular formula C22H16N4O
138
Fuel Oil No. 2
139
Natural gas condensates (a complex combination of hydrocarbons primarily in the carbon range of C5 to C15 that are condensed during production at a well head, in a natural gas processing plant, natural gas pipeline or straddle plant), including any of their liquid distillates that are primarily in the carbon range of C5 to C15
140
Phenol, 5-chloro-2-(2,4-dichlorophenoxy)-, which has the molecular formula C12H7Cl3O2
141
Acetamide, N-[4-[(2-hydroxy-5-methylphenyl)azo]phenyl]-, which has the molecular formula C15H15N3O2
142
Cobalt and soluble cobalt compounds
143
N,N′-mixed phenyl and tolyl derivatives of 1,4-benzenediamine
144
Benzene, 1-chloro-2-[2,2-dichloro-1-(4-chlorophenyl)ethyl]-, which has the molecular formula C14H10Cl4
147
Benzene, 1,1′-methylenebis[4-isocyanato-, which has the molecular formula C15H10N2O2
148
Benzene, 1,1′-methylenebis[2-isocyanato-, which has the molecular formula C15H10N2O2
149
Benzene, 1-isocyanato-2-[(4-isocyanatophenyl)methyl]-, which has the molecular formula C15H10N2O2
150
Benzene, 1,1′-methylenebis[isocyanato- (non-isomeric-specific), which has the molecular formula C15H10N2O2
151
Isocyanic acid, polymethylenepolyphenylene ester, which has the molecular formula C15H10N2O2•[C8H5NO]n in which 0≤n≤4
163
Plastic manufactured items
1999, c. 33, Sch. 1
SOR/2000-109
SOR/2001-1, 147
Canada Gazette Part II, err.(F), Volume 135, page 382
